Can You Put a Hot Tub Inside Your House?

One of the main reasons why people hesitate when thinking about getting a hot tub or not is due to the cost of running one.

Hot tubs are designed to be kept on indefinitely due to how long it can take to heat them up, and this can increase your energy bill by a considerable amount.

Now pair this with the cooler temperatures of the outside, and you’ve got yourself even higher bills to pay.

So, many people want to put their hot tub inside where they can control the temperature to avoid the heater from having to work overtime to keep the water hot.

Moreover, an inside hot tub can be much more relaxing due to the fact that you’re away from all the bugs and insects flying around.

The water will remain cleaner due to less external elements, and you won’t have to brace yourself for the freezing cold journey from the hot tub to the house.

If you’re thinking about getting a hot tub but want to put it inside, you’ve come to the right place.

Below we’re going to answer the question everyone’s wondering, as well as some considerations to take before confirming your decision.

So, can you put a hot tub inside?

The short answer is – yes! You can certainly place your hot tub inside if you’d prefer that over it being outside.

As long as you have enough space and the correct plumbing equipment, you can put your hot tub inside or outside your house.

Having said that, just because you can put a hot tub inside your home, it doesn’t necessarily mean that you should.

In fact, there are quite a few considerations that you should think about before putting a hot tub inside.

 

Important Considerations

While it might seem like the opportunity to put a hot tub inside is a no brainer, you shouldn’t rush to do so without thinking about it from every angle.

Let’s take you through the considerations to take before committing to an inside hot tub, certified by people who have made these mistakes before.

Mark our words – you want to read the following advice, as it might just save you a lot of time and money!

Choosing the Model

Before you even begin thinking about installing an indoor hot tub, you need to choose the right model for your needs.

Don’t just go for the first hot tub that you see or the least expensive model – take your time and research the different options.

You’ll need to take into consideration the size of the hot tub, the power source, and the plumbing situation.

Some hot tubs require external plumbing and some don’t, so you need to choose the best option for your house.

Relaxation Corner

Simultaneously with the hot tub, you should be thinking about where you’re going to install your hot tub inside your home.

Do you have a special room where you’re going to place it, or are you trying to squeeze it into a smaller room?

The room needs to have all of the right equipment that a hot tub needs.

We’ll be discussing all of the information below, so make sure you keep reading to ensure you know what to look for.

Make sure you opt for a hot tub that is the correct size for your house – not too small or too big.

Lay Your Base

The flooring needs to be a non-slip material that will allow you to get out of the hot tub without slipping all over the place.

A bathroom tile is often ideal for this if you have enough spare space in your bathroom.

Non-slip material does cover carpet and wood, but please don’t place your hot tub on these floorings.

When you get out of a hot tub, you’ll be bringing around a gallon of water with you which will all end up on the floor.

If you let this amount of water fall onto carpet or wood, your floor will rot and you’ll need to replace it.

This will cost you a lot of money, so steer clear from this mistake.

You can also install a drain into the floor near your hot tub to avoid having to clean all of the spillage up afterward.

Don’t Go Chasing Waterfalls

Make sure that your hot tub is situated close to a water source that can be used to refill it whenever necessary.

There is not much worse than wanting to enjoy a quick dip, only to find yourself running back and forth between the kitchen sink and your hot tub with heavy buckets.

Cover It Up!

Steam is the number one cause of mold and mildew, so you need a high-quality cover to ensure that this steam is contained while you’re not using the hot tub.

This protects your walls while you’re not using the hot tub, but what about when you’re in it?

You can protect your walls from the steam with tile, cement coverings, or drywall.

These are water-resistant materials that can be wiped down after every use to avoid the mold spores from infesting your home.

Fan It Out

Don’t forget to vent it out! A high-quality ventilation system will ensure that the moisture in the air will be removed to avoid moisture from creating mold and damp spots in your house.

Some mold grows behind your walls and you won’t notice it until it’s too late, so it’s important that you’re protecting your house as much as possible.

Final Say-Conclusion

If we haven’t scared you away from installing a hot tub inside your house with all of the considerations to take beforehand, then we hope that you enjoy your indoor relaxation time!

Indoor hot tubs give you better privacy, convenience, protection, and can even lower your bills, so why don’t you give it a go?

Just make sure that you set the area up properly beforehand. Consider the walls, flooring, and ventilation.

Also, think about how you’re going to fill the hot tub and the area that you’re going to use it in.

Plenty of people have had success with indoor hot tubs, just don’t rush the process!