The Best Ways to Safely Clean Your Pool

A thorough pool cleaning will keep it sparkling and inviting for the swimming season. This will ensure clean and safe pool water that is ready for use every day.

Routine pool cleaning can also cement the saving of time by reducing the need to make emergency runs to shops for various chemicals and disinfectants to clean your pool. It is also important to keep in mind that it will also reduce lifecycle costs.

In this article, we will list out the best ways to safely your pool. So, let’s get started!

Skimming the Debris, Insects, and Leaves

This step will help your pool to look clean and should be a daily task on your to-do list. You should remove any debris before it reaches the bottom of your pool that may make it difficult to remove. Another common issue is the falling of leaves and other things into your pool. You can use a long-handled leaf skimmer to gather leaves, dead insects, or other kinds of floating dirt, as your main aim should be to not let any dirt sink to the bottom of your pool.

Taking just a couple of minutes, skimming is quite easy and helps you save a considerable amount of time in the long run.

back to menu ↑

Brushing Your Pool Walls Thoroughly

Using a pool brush, you can scrub the walls and floor of your pool. Don’t forget to give the pool fixtures such as slides and ladders a good brush as well. This will help to detach any dirt and algae before it makes your pool their permanent residence. Try to brush the debris and algae towards the main drain.

Before you choose a pool brush, you have to keep in mind the surface material of your pool. If you have gunite, you should opt for a brush with stainless steel bristles, whereas stainless steel and nylon bristles are preferable for unpainted concrete pool surfaces. For vinyl, fiberglass, and painted concrete surfaces you should strictly use pool brushes that have nylon bristles.

Also, don’t buy cheap brushes instead of heavy-duty pool brushes. Since they will be used frequently (at least twice every week) and exposed to harsh chemicals, they may come apart easily.

back to menu ↑

Using a Pressure Washer to Clean Your Pool

Opting for a pressure washer is extremely efficient when it comes to pool cleaning. It should be noted that the pool should be constructed of plaster, concrete, or exposed aggregate. This is because only these three types can withstand the power of a pressure washer.

You need to drain the pool and let it dry before using the pressure washer. It is also advisable to remove debris that gets usually collected on the pool floor. Use the pressure washer to wash the walls and algae. Work in sections so as to ensure complete and effective cleaning of the pool.

Apply a pressure washer detergent on the walls and then clean using the low-pressure spray. As for the algae, you’ll need an algaecide or a bleach and water solution after you remove it using the high-pressure option of the washer.

back to menu ↑

Vacuuming Your Pool to Keep it Sparkly

Pool vacuuming should be done every alternate day. People who think that pool vacuuming isn’t necessary are not aware of the health risks that come with an unclean pool.

While it is true that you can clean your pool manually, choosing a vacuum will help you save time without any compromise on the efficiency of the process. And it will save you hours. A very efficient option is using a cordless vacuum cleaner to improve your filter system and ensure a complete cleaning.

You can opt for the robotic vacuum, pressure vacuum, or suction vacuum as per the needs of your pool. The robotic vacuum works separately from the pool‘s filtration system. A pool pump is required in the case of pressure vacuums which use a pressure line from the filtration system of the pool to move about. Suction vacuums use the water flow of the filtration system of the pool and can be attached to a skimmer or suction port.

Always remember to buy a vacuum that is high-quality and comes with a warranty. Otherwise, they may tend to malfunction and breakdown when subjected to too much use.

back to menu ↑

Keep the Pump Running and Cleaning the Skimmer

The entire circulation system of your pool should keep running at all times. This includes the skimmer, pump strainer, drains, filter, and pump. You need to be certain that the circulation system is working well enough to properly filter the water keeping it in good condition or not.

The skimmer should also be cleaned to remove the accumulated debris. This will establish the maximum efficiency of the skimmer without any extra effort on your part. Keep in mind to empty your skimmer every week without fail.

back to menu ↑

Keep a Check on Your Pool Water

Testing pool water frequently is quite important. In fact, if you are one of those whose pool is used frequently, you might have to test it daily even.

You should also add chemicals to the pool, as appropriate. This may include sanitizers, disinfectants, and so on. Adding chemicals can help to keep a check on the growth of algae and bacteria. Performing shock treatments also help to maintain the quality of water and cleanse it of any organic matter.

Ultimately, these were a few ways in which you can keep your pool clean and ready for use. Please take care to develop a cleaning and maintenance routine when it comes to your pool. Not only is the health of you and your family at risk when you neglect cleaning your pool, but you will also have to spend a lot of time and money if you procrastinate until an emergency for a pool cleaning.

Resources – Hayward, Pressure Washers Direct

We will be happy to hear your thoughts

Leave a reply