How to DIY Repair Your Hot Tub Plumbing

[wpsm_titlebox title=”How to DIY Repair Your Hot Tub Plumbing ” style=”1″][contents h2][/wpsm_titlebox]

Owning a hot tub provides a great place to unwind, but like many home appliances, they sometimes require some upkeep.

If you suspect that your hot tub’s plumbing is compromised, there are a few tell-tale signs that will let you know for sure. In some cases, you won’t even need to hire a plumber to fix your hot tub’s plumbing.

Often, hot tub plumbing repairs are simple to do and don’t require a lot of technical knowledge. As long as you follow the given steps carefully, you’ll be well on your way to repairing your hot tub’s plumbing.

When Do I Need to Repair My Plumbing?

If your hot tub’s plumbing needs maintenance, you’ll probably be aware. A lot of the tell-tale signs are very noticeable and telling. So you can be completely sure whether or not your hot tub’s plumbing needs attention, let’s go over a few of the tell-tale signs.

Your Hot Tub’s Water Smells Off

If your hot tub’s pipes have clogs or damages, it can lead to some tricky complications. In the case of a damaged pipe, the water can run off into unintended places, causing mildew mold leading to a strong odor.

If your plumbing severely needs attention, the problems can even affect the appearance of your hot tub’s water.

You Notice Murky Water and Algae

If your hot tub’s water begins to appear murky, that’s a telltale sign of plumbing issues. If you notice that your hot tub’s water is murky, you should try to solve the problem as soon as possible. At this point, your plumbing could be in severe need of repairs immediately.

You Have Jet Pressure Issues

An article from Vandor Pools and Spaws say that inconsistent jet pressure is typically related to plumbing issues. More likely than not, a build-up or a clog is restricting the flow of water. Fixing this could be as simple as using a bent hanger or as involved as replacing some PVC pipes to help regulate the flow again.

You Notice Leaks

If you notice water near your hot tub and you know that you weren’t the culprit, the issue might be the plumbing. Sometimes the solution to this problem is as easy as applying a seal, but more serious cases might require PVC replacement. If you feel nervous to replace any of these parts, it’s always best to call a professional to address your plumbing problems.

How to Repair Pipes with Minor Damage

Hot tub pipes with minor damage are typically pretty easily repaired or replaced. Both replacing and repairing your hot tub’s PVC is relatively inexpensive.

This is especially true when comparing the cost of making the repair to the cost of hiring a professional plumber. These plumbing repairs require very few supplies, and little technical knowledge to complete.

The Epoxy Method

Epoxy is one of many sealant-style pipe repair tools on the market. Alternatively, you can use a product like Plast-Aid, which serves the same purpose.

Simply remove the PVC pipe, allow it to dry, and apply one of these products to the crack. You can use these products to safely seal cracked or otherwise damaged pipes with a simple, one-time application.

Clip-on Pipe Seals

Clip-on pipe seals require a little more involvement, but they provide one more easy way to repair PVC. You can fix your hot tub’s plumbing first by applying PVC primer to both the PVC Pipe and the Pipe Seal.

When they’re dry, follow up with a healthy coat of PVC cement. While the PVC cement is fresh, apply the clip-on seal to the same area. Make sure it stays in the correct position while the PVC cement dries.

You can ensure that your PVC dries correctly by resting it on a flat surface covered with newspaper. Let it lay undisturbed for 2 hours, or until your PVC cement has fully dried.

How to Replace Severely Damaged Pipes

In some cases, the severity of a pipes damage is beyond repair. In this case, the situation demands that you or a professional plumber replace the damaged PVC pipe.

If you’ve decided to replace some damaged pipes as opposed to repair them, there are a few things you’ll need. This Home Guides article has a lot of helpful info regarding how to replace and repair PVC pipes.

Get PVC & Fittings

First of all, you’ll need to get PVC pipes to replace the ones you’re retiring as well as any necessary fittings. Make sure you get enough PVC to work with, and you’ll need a PVC pipe saw in order to make them fit perfectly.

PVC Primer & PVC Cement

Once you have PVC pipes, fittings, and a PVC pipe saw, you’re well on your way! Next, you’ll need a PVC primer and PVC cement.

The PVC primer will make your repairs last far longer, preventing future damage. If you make that investment now, you’ll thank yourself later.

The PVC cement seals the PVC pipes to the various joints and fittings that connect them. Sealants like these prevent the pipes from leaking when you use them.

Hot Tub Plumbing is Sometimes a DIY Project

On some occasions, you might need to hire a professional plumber to resolve your hot tub’s plumbing problems. If you ever feel uncomfortable solving these plumbing issues yourself never hesitate to call a professional. Often, hot tub plumbing repairs are small and easy DIY projects. If you want to be economical, try some of these hot tub plumbing repair tips for yourself!

Leave a Comment