9 Must-Have Repairs for Your Kitchen Cabinets After Winter

9 Must-Have Repairs for Your Kitchen Cabinets After Winter

Most homeowners would admit that their kitchen cabinets have bugged them from time to time. What with having to deal with broken latches, sticking drawers, loose door hinges, cracked cupboard doors, etc. All these cupboard repairs are enough to drive anyone bonkers. However, you don’t have to let any of such issues drive you mad. Today, we provide you with simple, easy fixes that can help you repair most of the common cupboard problems.

Mostly, you find that it is the little things that can drive you crazy in the kitchen. And it is these little issues that can lead you to slam cupboard drawers, nick door fronts, and even ignore loose door knobs. Most homeowners would admit that these kitchen cabinet issues sound familiar. However, that’s what this article is for. To provide you with quickest and easiest kitchen cabinet repairs. Here, you should find many simple solutions that help stem down some of your most common kitchen cabinet woods.

Here are kitchen cabinet repairs to consider:

  1. Adjust or replace bad latches

Most of the newer cabinets have hinges that are self-closing to hold the doors shut. However, you find that the other cabinets have magnetic or roller catches. Cabinet catches that no longer keep their doors closed are either out of adjustment or broken. Most of the catches are fastened using two screws. That makes replacing and damaged catch a simple process. Plus, catch adjustments are also just as simple. Only that you may need to readjust the readjust your cabinet catch a couple of times before finally getting it right. So, loosen the screws and move the catches in and out until you readjust them accordingly. Then tighten the screws once again. Try and try again until the door shuts tightly.

  1. Adjust hinges on misaligned doors

You might also want to check the depth and side screws of your kitchen cabinets to ensure that they are on point. Ensure that your kitchen cabinet door is not flush with the other doors next to it. Adjust your depth screw so that it moves the door of your cabinet in or out. Also, you find that depth screws are designed to move the door of your cabinets as you turn them. However, with most, you find that you must loosen the screws, nudge the doors in and out, then tighten them again. Also, you can start with the side screws if your cabinet hinges don’t have depth screws. Side screws move your cabinet doors from side to side.

  1. Replace worn-out drawer slides

Check for any worn-out kitchen Cupboard Doors and replace any that you find with identical slides. Also, check for bent rollers or slides and replace them soon as you can. Broken or bent rollers cannot turn even when properly lubricated. In most occasions, replacing the worn-out, bent or broken slides is usually the best solution. However, you also want to remember to keep this process as simple as possible. To mean, you only need to buy new slides which are identical to the old ones. This makes replacing them an easy matter.

  1. Add bumpers to banging doors

You also want to ensure you place good bumpers at the top and even the lower corners of your cabinet doors. This prevents them from banging shut every time you close them. For such situations, the peel-and-stick door bumpers are usually the best solution to opt for. When placing, the door bumpers, you want to make sure that the back of your cabinet doors is clean. This enables the bumpers to stick in their place easily.

  1. Repair a broken drawer box

You don’t want to put up with any broken corner joints on drawers. Try and work hard on fixing any broken drawer box parts that develop before they fall apart. Most drawer fronts are usually fastened by many screws. You might also want to consider removing items such as nails, staples, and even screws from your cupboards.

  1. Lubricate sticking drawers

To keep your kitchen cabinet drawers in pristine condition and prevent them from needing too many repairs in the future. To lubricate your cabinet doors, you want to have the drawers removed. This allows you to access the slides easily. Plus, you also find that most of today’s drawers are easily removable. You only need to pull at them all the way out.

kitchen cabinets

Then when they are almost all the way out, you can either lift or lower the front of your drawer slowly until such a time that the light spray lubricant has done its purpose. And that the wheels come out from the tracks. Afterward, you can then clean and coat the tracks using a light spray lubricant. Plus, your cabinet will also spin easily.

  1. Glue loose knobs

Ensure that you also check the knobs of your cabinets and glue any loose knobs that you come across in their place. A tiny drop of Thread Lock. The good news here is that you can easily unscrew them using a good screwdriver.

  1. Touch up nicks and scratches

Ensure that you use stain-filled touch-up markers to treat scratches and nicks on your cabinet doors.  You can do this by dabbing a piece of clean cloth in the touch-up markers. Scratches tend to accumulate a lot of stains. If left to linger around for too long, these stains can turn to be a lot darker then its surrounding finish. Therefore, you might want to start with the markers that are lighter than your initial cabinet finish. You can also use filler pencil to hide scratches and nicks to color and fill them.

  1. Fill stripped screw holes

You can fill any stripped screw holes using toothpicks and glue. Stripped screw holes ones that turn a lot easier. However, they do not tighten. For such screws, you should remove the screw, dip it in glue, and then screw it back at the screw hole. Hold it in place until the glue dries out.

Final thoughts

The repairs of cupboard doors and other cupboard parts isn’t an easy process. However, that doesn’t mean that their repairs are impossible. Matter of fact, they are very much achievable as long as you put the right work to play.

We will be happy to hear your thoughts

Leave a reply